Clear Filters | 141 - 160 of 5024 results

250716-F-AM292-1142

Airmen from the 49th Medical Group transfer a 200-pound training dummy from a gurney to an operating table during a Medic-X exercise at Holloman Air Force Base, New Mexico, July 16, 2025. This exercise allowed every member of the medical group to sharpen field skills they are not able to practice every day while providing critical clinical support to Team Holloman. (U.S. Air Force photo by Tech. Sgt. Victor J. Caputo)
Details Download

250716-F-AM292-1142

U.S. Air Force Airman 1st Class Da’Ja Thomas, 49th Healthcare Operations Squadron mental technician, low-crawls through an obstacle course during a Medic-X exercise at Holloman Air Force Base, New Mexico, July 16, 2025. This iteration of Medic-X integrated field exercises for medics who typically perform clinical and administrative duties, allowing them to sharpen their tactical skills while supporting lethal warfighters downrange. (U.S. Air Force photo by Tech. Sgt. Victor J. Caputo)
Details Download

250716-F-AM292-1142

U.S. Air Force Tech. Sgt. Felix Kietur, 49th Operational Medical Readiness Squadron NCO in charge of medical maintenance, helps demonstrate how a patient is stabilized in the vent of a possible spinal injury during a Medic-X exercise at Holloman Air Force Base, New Mexico, July 16, 2025. The 49th Medical Group integrated hands-on tactical skills exercises into their monthly training day to help instill a warfighter mindset and enhance the technical expertise of Team Holloman’s medics. (U.S. Air Force photo by Tech. Sgt. Victor J. Caputo)
Details Download

250716-F-AM292-1142

Airmen from the 49th Medical Group train on cleaning and covering wounds during a Medic-X exercise at Holloman Air Force Base, New Mexico, July 16, 2025. This exercise allowed every member of the medical group to sharpen field skills they are not able to practice every day while providing critical clinical support to Team Holloman. (U.S. Air Force photo by Tech. Sgt. Victor J. Caputo)
Details Download

Service Level Training Exercise

U.S. Marines with 2d Reconnaissance Battalion, 2d Marine Division conduct a freefall jump off a C-130 Hercules during Service Level Training Exercise 4-25, on Marine Corps Air-Ground Combat Center, Twentynine Palms, California, July 17, 2025. SLTE 4-25 is designed to be a challenging, realistic training environment that produces combat-ready forces capable of operating as an integrated Marine Air Ground Task Force across all domains of military operations. (U.S. Marine Corps photo by Lance Cpl. Judith Ann Lazaro)
Details Download

Finlet install

Bryan Jenkins, Vortex Control Technologies, and Airman 1st Class Tustin Bridges, 1st Special Operations Wing, install a 3D-printed Finlet onto the rear door of an MC-130J July 9 at Eglin Air Force Base, Florida. The 417th Flight Test Squadron’s air crew and engineers will analyze the Finlets’ flight and air handling qualities as well as the aircraft’s airdrop compatibility with the new additions. (U.S. Air Force photo by Samuel King Jr.)
Details Download

Finlet install

Airman 1st Class Tustin Bridges, 1st Special Operations Wing, and Bryan Jenkins, Vortex Control Technologies, install a 3D-printed Finlet onto the rear door of an MC-130J July 9 at Eglin Air Force Base, Florida. The 417th Flight Test Squadron’s air crew and engineers will analyze the Finlets’ flight and air handling qualities as well as the aircraft’s airdrop compatibility with the new additions. (U.S. Air Force photo by Samuel King Jr.)
Details Download

Finlet install

A 3D-printed Finlet sits on each side of a MC-130J’s tailfin waiting to be tested July 9 at Eglin Air Force Base, Florida. The 417th Flight Test Squadron’s air crew and engineers will analyze the Finlets’ flight and air handling qualities as well as the aircraft’s airdrop compatibility with the new additions. (U.S. Air Force photo by Samuel King Jr.)
Details Download

Finlet install

Airman 1st Class Tustin Bridges, 1st Special Operations Wing, secures a 3D-printed Finlet onto the rear door of an MC-130J July 9 at Eglin Air Force Base, Florida. The 417th Flight Test Squadron’s air crew and engineers will analyze the Finlets’ flight and air handling qualities as well as the aircraft’s airdrop compatibility with the new additions. (U.S. Air Force photo by Samuel King Jr.)
Details Download

250709-Z-F3914-1001

Kingsley Field Fire department responds to the Elk Fire, July 09, 2025. The crew was on the scene for over 10 hours. (Courtesy photo from Kingsley Fire Dept.)
Details Download

Holloman Combat Arms Training and Maintenance cadre make students and equipment ready for battle

U.S. Air Force Staff Sgt. Nicolas Bood, 49th Security Forces Squadron Combat Arms Training and Maintenance instructor, removes an M18 in the CATM armory at Holloman Air Force Base, New Mexico, July 3, 2025. Pistols, rifles and other firearms are regularly maintained by CATM staff to keep them ready for students to complete qualification requirements, keeping daily carriers and deployers alike combat-ready. (U.S. Air Force photo by Senior Airman Bob Teichmann)
Details Download

Holloman Combat Arms Training and Maintenance cadre make students and equipment ready for battle

U.S. Air Force Staff Sgt. Nicolas Bood, 49th Security Forces Squadron Combat Arms Training and Maintenance instructor, examines the scope of an M110A1 sniper rifle in the CATM armory at Holloman Air Force Base, New Mexico, July 3, 2025. Holloman is one of only a few bases that provide specialized long-range rifle qualification. (U.S. Air Force photo by Senior Airman Bob Teichmann)
Details Download

Holloman Combat Arms Training and Maintenance cadre make students and equipment ready for battle

Combat Arms Training and Maintenance students practice cleaning their firearms after a class on M18 pistol handling and maintenance at Holloman Air Force Base, New Mexico, July 3, 2025. Students spend several hours of class time learning how to handle, clean and properly use firearms prior to firing them on the range. (U.S. Air Force photo by Senior Airman Bob Teichmann)
Details Download

Holloman Combat Arms Training and Maintenance cadre make students and equipment ready for battle

U.S. Air Force Staff Sgt. Christian Dowis, 635th Materiel Maintenance Squadron contingency trainer, removes the slide off a M18 pistol during a Combat Arms Training and Maintenance course at Holloman Air Force Base, New Mexico, July 3, 2025. Instructors teach a variety of courses, ranging from annual requalification of daily firearms carriers to first-time pistol users who are about to deploy. (U.S. Air Force photo by Senior Airman Bob Teichmann)
Details Download

Holloman Combat Arms Training and Maintenance cadre make students and equipment ready for battle

The slide of a dismantled M18 pistol is adjusted at Holloman Air Force Base, New Mexico, July 3, 2025. Combat Arms Training and Maintenance instructors spend several hours each week keeping weapons in the CATM armory ready to use for students who learn to be combat-ready. (U.S. Air Force photo by Senior Airman Bob Teichmann)
Details Download

Holloman Combat Arms Training and Maintenance cadre make students and equipment ready for battle

Combat Arms Training and Maintenance students learn how to properly handle M18 pistols at Holloman Air Force Base, New Mexico, July 3, 2025. The 49th Security Forces Squadron regularly conducts classes for a variety of CATM students, ranging from deployers to 49th SFS patrolmen who carry firearms daily. (U.S. Air Force photo by Senior Airman Bob Teichmann)
Details Download

Holloman Combat Arms Training and Maintenance cadre make students and equipment ready for battle

U.S. Air Force Senior Airman Kasy Rowe, 49th Security Forces Squadron Combat Arms Training and Maintenance instructor, discusses safe firearm handling at Holloman Air Force Base, New Mexico, July 3, 2025. Instructors provide the same level of thorough guidance, regardless of student experience level or qualification type, to ensure they are ready to safely use firearms when needed. (U.S. Air Force photo by Senior Airman Bob Teichmann)
Details Download

Holloman Combat Arms Training and Maintenance cadre make students and equipment ready for battle

A set of M4 rifles is seen at the Combat Arms Training and Maintenance armory at Holloman Air Force Base, New Mexico, July 3, 2025. The 49th Security Forces Squadron stocks and maintains a variety of firearms for CATM qualification of deployers and base armed personnel. (U.S. Air Force photo by Senior Airman Bob Teichmann)
Details Download

Holloman Combat Arms Training and Maintenance cadre make students and equipment ready for battle

U.S. Air Force 1st Lt. Dawson Lee, 49th Logistics Readiness Squadron fuels management flight commander, left, verifies an empty M18 pistol chamber with U.S. Air Force Senior Airman Kasy Rowe, 49th Security Forces Squadron Combat Arms Training and Maintenance instructor, at Holloman Air Force Base, New Mexico, July 3, 2025. Instructors verify the safety of all firearms with students prior to classroom time, when they provide proper care and handling instructions. (U.S. Air Force photo by Senior Airman Bob Teichmann)
Details Download

250712-Z-WU657-1008

Nevada Air National Guard's 152nd Maintenance Group and 152nd Logistics Readiness Squadron personnel load Modular Airborne Fire Fighting System (MAFFS) equipment onto MAFFS #8, aircraft #554 at the Nevada Air National Guard Base on July 12, 2025. U.S. Northern Command activated two Modular Airborne Fire Fighting System (MAFFS) Aircraft, one from the 152nd Airlift Wing out of Reno, Nevada, and one from the 146th Airlift Wing out of Channel Islands Air National Guard Station in California. Two C-130 aircraft equipped with MAFFS and their associated personnel will support firefighting efforts in the Western United States. The 152nd Airlift Wing’s “High Rollers” and 146th Airlift Wing's “Hollywood Guard” report on July 14, 2025, and will be initially based out of Channel Islands Air National Guard Base in California and are anticipated to be in place through August 14, 2025.
Details Download